Preventing Frozen Water Pipes And Meters
It’s the cold truth: Preventing frozen pipes is far easier than replacing pipes that freeze and burst. And that’s not even considering paying for the damage to your home and possessions that can result from burst pipes.
Water pipes and meters can freeze within hours of the onset of sub-freezing weather – if they’re exposed to cold air or drafts. Property owners – not Aquarion – are responsible for protecting their water pipes and water meters (interior or exterior) from cold air and wind.
Fortunately, that’s relatively easy to do. These steps will help you prevent the damage, expense and inconveniences of having your pipes or water meter freeze.
Before Freezing Weather
- Find the main water shut-off valve to your home. Show all household members how to turn it off in case of a burst pipe or similar emergency.
- The pipes most likely to freeze are those nearest an uninsulated wall, door, window, garage, attic, basement or along an uninsulated floor.
- Add insulation to exterior walls wherever possible and wrap pipes with insulation.
- Eliminate cold drafts near water pipes and, if yours is indoors, your water meter. (See below for keeping outside meters from freezing.) Make sure all doors and windows to the outside are tightly closed, including those in basements and crawl spaces. Fill cracks in walls and around windows, replace cracked glass, and install storm windows on basement windows.
- Disconnect and drain garden hoses from outside faucets, and turn off the connection to those faucets at the interior valve. Drain any exposed pipes. Insulate outside faucets and backflow devices with newspaper, rags or similar material, covering them with plastic and securing with string or wire.
- Winterize irrigation systems.
- If your kitchen or bathroom sink is located against an outside wall, insulate the wall and exposed pipes. Open cabinet doors to allow warm air to circulate around the pipes.
- Keep the doors to rooms where the pipes and water meter are located so warm air can keep temperatures above freezing.
- Cover foundation vents with foam blocks or cardboard.
- If your water meter is in an outdoor pit, check to see that the pit cover fits properly and has no cracks through which cold air can flow. Inside the pit, check to make sure that the pipes, valves and water meter itself aren’t touching the pit’s walls. (The “pit” is a cylindrical casing with a metal cover about the size of a dinner plate or saucer.)
- Letting a faucet fed by pipes exposed to extremely cold weather drip can prevent the water inside from freezing. Flowing water can still freeze but this method makes it somewhat more difficult for the water to freeze.
- When you’re away, never completely shut off the heat unless you drain all the pipes and toilets first. If you do this, be sure to turn off your water heater first, and drain your heating system’s pipes and radiators, too.
- Flowing water can also break up ice that has started to freeze inside pipes. Turn on the water periodically at all faucets that are exposed to cold air when outside temperatures have been below freezing for several days.
If A Water Pipe Or Meter Freezes
- If you see or suspect damage to your water pipes:
- Call a licensed plumber for assistance.
- If you see or suspect a frozen or damaged water meter:
- Please call Aquarion’s customer service department at (603) 926-3319 (local) or (800) 403-4333.
- You will need to be home when we attempt to thaw the meter. This is to minimize any damage inside your house if any of your pipes have burst.
- As the homeowner is responsible for the water meter and the pipes on either side, you will be charged for any service calls needed to thaw or repair your meter.
- If there is no sign of damage to pipes or the meter, just a lack of water flow:
- Leave the faucet open as you attempt to thaw the pipe that feeds it.
- Once water starts flowing again, open a nearby faucet to allow a small stream of water to flow through the pipes. Keep that small flow running until you correct the problem that caused the pipe to freeze – most likely cold drafts and a lack of warm air circulating around the pipes or meter.
- And before we forget: Never use a torch or any other open flame to thaw a pipe or meter.